Web interface
The built-in web interface configures the device and shows live meter readings. It is available whenever Wi-Fi is active, and is responsive — it works on a phone, a tablet or a desktop browser.
This section is a reference: one page per screen, describing every field. For step-by-step setup, start at Get started.
Reaching it
| Wi-Fi mode | Address | Transport |
|---|---|---|
| Access Point | http://192.168.4.1 | HTTP — port 443 is closed |
| Client | https://ZiggyMeter-XXXX or the router-assigned IP | HTTPS, self-signed certificate |
Log in as admin with the password from the label supplied with the device — and change it straight away.
The screens
DashboardMeter totals, power inputs, clock and which channels are active.MeterReadings, schedule, protocol configuration and DLMS/COSEM settings.WiFiConnection status, joining a network, and the Access Point.ZigbeeEnable the radio, reset pairing, see network status.Home AssistantURL, token and certificate for the native integration.SystemIdentity, version, clock, upgrade, power saving, password, reset, diagnostics.
Interface conventions
- Language — switch with the translate icon in the top bar. The interface ships in English, German and Polish.
- Dark mode — the icon next to it.
- saves the section it belongs to. Changes are not applied until you select it.
- Some changes restart the device — enabling or disabling Zigbee, and joining a different Wi-Fi network. Each page says so where it applies.
TIP
Everything on these screens is also available through the REST API, which is what the interface itself uses.