Skip to content

Specification ​

Dimensions ​

ZiggyMeter dimensions

Mounting is magnetic, onto the metal ring around the meter's optical interface. See Mounting on the meter.

Power ​

PropertyValue
Input voltage2.1–5.5 V
Battery size2 × AAA (LR03 / R03)
Battery voltage1.2–1.5 V
Power socketUSB-C
USB-C supply5 V, 5 W
Source priorityUSB-C is used automatically when both are present
Reverse polarityProtected

See Power and batteries.

Environment ​

PropertyOperationStorage
Temperature0 to 50 °C−10 to 60 °C
Humidity10–90 %, non-condensing5–95 %, non-condensing

Communication ​

Wi-Fi ​

PropertyValue
Band2.4 GHz only
StandardWi-Fi 6 (802.11ax)
AuthenticationWPA, WPA2, WPA3
ModesClient (station) and Access Point

5 GHz and 6 GHz networks are not supported.

Zigbee ​

PropertyValue
RadioIEEE 802.15.4
StackZigbee 3.0
Cluster libraryZCL v8
RoleEnd Device
Channels11–26

Antenna ​

PropertyValue
Frequency2.4 GHz
Antenna connectorSMA male
Enclosure connectorSMA female
DetachableYes

See Antenna and signal.

USB ​

PropertyValue
ConnectorUSB-C
FunctionPower input and serial console
Serial settings115200 8N1

Optical interface ​

PropertyValue
StandardIEC 62056-21
ComponentsInfrared emitter and receiver
Wavelength850–940 nm
Baud rates300, 600, 1200, 2400, 4800, 9600, 19200

Supported meters ​

PropertyValue
Optical interfaceIEC 62056-21
ProtocolsIEC 62056-21:2002 and DLMS/COSEM
IEC 62056-21 modesA, B, C, D, E
DLMS/COSEMPull mode
DLMS authenticationNone, Low (password/LLS), High (GMAC)
DLMS activationVia mode E, or direct communication
DLMS encryptionSupported (GUEK + AK)

Not supported: SML, M-Bus, ANSI C12.18/19.

See Before you buy and Meter protocols.

Temperature sensor ​

PropertyValue
Range−10 to 80 °C
Error< 1 °C

Reported on the Dashboard and, over Zigbee, through the Temperature Measurement cluster (0x0402).

Reading schedule ​

PropertyValue
Minimum interval1 minute
Maximum interval6 months
UnitsMinutes, hours, days, months
Trigger timeConfigurable within the period

See Meter readings → Schedule.

Web interface and API ​

PropertyValue
Transport (client mode)HTTPS, port 443, self-signed certificate
Transport (Access Point)HTTP, port 80
Access Point address192.168.4.1
AuthenticationChallenge-response, SHA-256; bearer token
Token lifetime1800 s
Interface languagesEnglish, German, Polish

Note ​

This specification is subject to change without further notice.